Filter
Top Products
E-47
Basic Operation
Adjusting the Picture
You can adjust the projector’s picture to your preferences with the following picture settings. See page
44
for the procedure details.
e. g. RGB input in INPUT 1 or 2 mode
ß button
For less contrast
For less brightness
For less color intensity
Skin tones become purplish
For less sharpness
For weaker red
For weaker blue
For more contrast
For more brightness
For more color intensity
Skin tones become greenish
For more sharpness
For stronger red
For stronger blue
© button
All image adjustment items are returned to the factory preset
settings.
Selected item
Contrast
Bright
Color
Tint
Sharp
Red
Blue
Reset
•“Color”, “Tint” and “Sharp” do not appear for RGB input in INPUT 1 or 2 mode.
• To reset all adjustment items, select “Reset” on the “Picture” menu screen and press ENTER.
• The adjustments can be stored separately in the INPUT 1 to 5 modes.
• Depending on the type of signal received, “Sharp” may not be adjustable for COMPONENT input in INPUT 1 or 2 mode.
Adjusting the Color Temperature
This function can be used to adjust the color temperature to suit the type of image input to the projector
(video, computer image, TV broadcast, etc.). Decrease the color temperature to create warmer, reddish
images for natural flesh tones, or increase to create cooler, bluish images for a brighter picture.
Increases color temperature for
cooler, bluish, florescent-like
images.
(High color temperature)
Decreases color temperature for
warmer, reddish,
incandescent-like images.
(Low color temperature)
מ3 ם3
© button (Blue)
Selecting the Signal Type (RGB menu only)
This function allows you to select the input signal type RGB or COMPONENT for INPUT 1 or 2 port.
You can use this tool by accessing the “Button Assign” list on your GyroRemote. Choose popup list “4/5” and press
Function (4). (See page
33
.)
(Red) ß button