Filter
Top Products
E-53
Basic Operation
Displaying Dual Pictures (RGB menu only)
Picture in Picture function allows you to display two pictures on the same screen. You can display the
image input from INPUT 4 or 5 as an inset picture overlapping the main picture input from INPUT 1, 2 or
3. See page
44
for the procedure details.
You can use this tool by accessing the “Button Assign” list on your GyroRemote. Choose popup list “3/5” and press
Function (4). (See page
33
)
Reducing Image Noise (VIDEO menu only)
Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross color
noise. See page
44
for the procedure details.
• If the image is clear, select “ ” to prevent any blurring.
• The image from INPUT 1, 2 or 3 is displayed as the main picture and the image from INPUT 4 or 5 is displayed as the inset picture.
• The last displayed image from INPUT 4 or 5 is displayed as the inset picture.
For example, when you want to display the image from INPUT 4 as the inset picture, select INPUT 4, then select the main picture, and
then select “Pict in Pict”.
• Inset picture can only be displayed in video signal of NTSC/PAL/SECAM.
• When selecting the image for the inset picture, only the images being input will be displayed.
• The audio of the inset picture will come out of the projector’s speakers.
• Picture in Picture does not work in case of the following RGB signals.
UXGA signal image/Interlaced signal/DTV (480P/720P/1080i)
• You can only use the following functions while in Picture in Picture mode.
FREEZE: Works for the inset picture only.
0
1996 1997 1998 1999
50
100 C
150 B
200 A
250
300
1
Press ß to select “ ” to display an inset picture (Factory preset to INPUT 4).
2
Press ß/©/∂/ƒ to move the inset picture to one of four preset positions.