Filter
Top Products
5-38
9. Bitimage commands
ESC ∗ m nl nh [d1...dk] Bitimage Select
Code
1B
16
+ 2A
16
+ m + nl + nh + [d1...dk]
Domain of
function
m = 0,1,32,33
0 ≤ nl ≤ 255
0 ≤ nh ≤ 3
0 ≤ d ≤ 255
Function
Specifies the Bitimages with the number of dots specified as nl and nh in Mode m.
m Mode
The number
of dots in
the vertical
direction
The number of
dots in the
horizontal
direction
(1 line)
The number of
data (k)
0 8 dot single density 8 192 nh
×
256 + nl
1 8 dot double density 8 384 nh
×
256 + nl
32 24 dot single density 24 192 (nh
×
256 + nl)
×
3
33 24 dot double density 24 384 (nh
×
256 + nl)
×
3
Details
• If m is out of the domain of function, the data after nl is processed as the normal
data.
• nl and nh mean the number of dots in the horizontal direction of the Bitimage to
be printed.
• If the dot is specified beyond the printable area, the data is deleted.
• The data deployment position corresponds to the deployment start position.
• This command is affected by the inverse print but the others such as dual print,
bold print and reverse print.
• Refer to the diagram for how to deploy the data.