Filter
Top Products
Ethernet-DK
22 Rev. 0.6
5. The default web browser should launch and display the home page served by the embedded web server. The
same result can be achieved by typing the IP address of the embedded web server into the address bar of a
web browser. Figure 16 shows a screenshot of the home page.
Now go directly to Section "6.3. Stage 3—Configuring MAC and IP Addresses over the Serial Port" on
page 25.
Figure 16. Hello World Web Page
6. If the network does not have a DHCP server, then the embedded system will search for approximately 35
seconds before going into static IP address mode. After going into static IP address mode, Netfinder will
display information about the device in a window with a yellow background. Select the device by clicking
inside the yellow area and pressing the Assign IP button as shown in Figure 17.
Figure 17. Static IP Address Mode