Filter
Top Products
37
Using the projector
Image menu
Color menu
FUNCTION
(default setting/value)
DESCRIPTION
Picture Mode
(Cinema Mode)
Pre-defined picture modes are provided so you can optimize your
projector picture set-up to suit your program type. See "Selecting a
picture mode" on page 23 for details.
Load Settings From
Selects a picture mode that most suits your need for the picture
quality and further fine-tune the picture based on the selections
listed below. See "Setting the User 1/User 2/User 3 mode" on
page 24 for details.
Brightness
(depends on the
selected input source)
Adjusts the brightness of the picture. See "Adjusting Brightness" on
page 25 for details.
Contrast
(depends on the
selected input source)
Adjusts the degree of difference between dark and light in the
picture. See "Adjusting Contrast" on page 25 for details.
Color
(depends on the
selected input source)
Adjusts the color saturation level -- the amount of each color in a
video picture. See "Adjusting Color" on page 25 for details.
Tint
(depends on the
selected input source)
Adjusts the red and green color tones of the picture. See
"Adjusting Tint" on page 25 for details.
Sharpness
(depends on the
selected input source)
Adjusts the picture to make it look sharper or softer. See "Adjusting
Sharpness" on page 25 for details.
Reset Picture Settings
Returns all settings in the Image and Color menus to the factory
preset values. See "Resetting the picture mode" on page 24 for
details.
Rename User Mode
Renames User 1, User 2, or User 3. See "Renaming user modes" on
page 24 for details.
FUNCTION
(default setting / value)
DESCRIPTION
Black Level
(0 IRE)
Sets the picture grayscale as 0 IRE or 7.5 IRE. See "Setting Black
Level" on page 26 for details.
Clarity Control
Adjusts the picture clarity. See "Controlling image clarity" on
page 26 for details.
Color Temperature
(depends on the
selected Picture Mode)
There are several color temperature settings available. See
"Selecting a color temperature*" on page 26 for details.
Color Temperature
User_ Fine Tuning
See "Setting a preferred color temperature" on page 27 for details.
Gamma Selection
(depends on the
selected Picture Mode)
See "Selecting a Gamma setting" on page 28 for details.
Brilliant Color
(On)
See "Adjusting Brilliant Color" on page 28 for details.
Color Management
See "Color Management" on page 27 for details.
Dynamic Black
(On)
See "Adjusting contrast ratio via IRIS" on page 29 for details.