Filter
Top Products
38
Using the projector
Display menu
System menu
IRIS
See "Adjusting contrast ratio via IRIS" on page 29 for details.
Lens Shift
See "Shifting the projection lens vertically" on page 11 for details.
FUNCTION
(default setting / value)
DESCRIPTION
Aspect Ratio
(Anamorphic)
There are several options to set the picture's aspect ratio
depending on your input source. See "Selecting the aspect ratio"
on page 29 for details.
Keystone
(0)
Corrects any keystoning of the picture. See "Correcting picture
distortion" on page 22 for details.
Position
(0)
Displays the position adjustment page. To move the projected
picture, use the directional arrow keys. The values shown on the
lower position of the page change with every key press you made
until they reach their maximum or minimum.
Overscan Adjustment
(depends on the
selected input source)
Conceals the poor picture quality in the four edges. You can also
manually press / to decide how much to be concealed.
Setting 0 means the picture is 100% displayed. The greater the
value, the more portion of the picture is concealed while the
screen remains filled and geometrically accurate.
PIP
Turns the PIP window on or off and makes related adjustments. See
"Displaying more than one image source simultaneously" on
page 32 for details.
PC & Component
YPbPr Tuning
H.Size (0)
Adjusts the horizontal width of the picture.
Phase (0)
Adjusts the clock phase to reduce picture
distortion.
Auto
Adjusts the phase, and frequency automatically
FUNCTION
(default setting / value)
DESCRIPTION
Language
(English)
Sets the language for the On-Screen Display (OSD) menus. See
"Using the menus" on page 19 for details.
Splash Screen
(SIM2)
Allows you to select which screen will display during projector start-
up. Three options are available: SIM2 logo screen, Blue screen, or
My Screen.
My Screen
Captures and stores the projected picture as My Screen. See
"Creating your own startup screen" on page 33 for details.
Projector Position
(Floor Front)
The projector can be installed on a ceiling or behind a screen, or
with one or more mirrors. See "Obtaining a preferred projected
image size" on page 11 for details.
Auto Off
(Disable)
Prevents unnecessary projection when no signal is detected for a
long time. See "Setting Auto Off" on page 43 for details.
Sleep Timer
(Disable)
Sets the auto-shutdown timer. The timer can be set to a value
between 30 minutes and 3 hours.
Background Color
(Blue)
Allows you to choose the color of the background screen that will
be displayed when there is no input signal detected.