Filter
Top Products
12 Installing the DT770
Securing the DT770
You can secure the DT770 by attaching a cable (not supplied) between an immovable object and
the Kensington® cable and lock device that’s built into the back of the unit.
Turning on the DT770
Press the Power button in the top right of the DT770.
Press the Power button again to turn off the DT770.
Installing SMART Board Software
You can install SMART Board software on your computer from the provided SMART Board
software CD. For complete details on installing and using this software, refer to the SMART Board
Software User’s Guide that came with your DT770.
1. If you haven’t already done so, turn on the computer and the DT770.
2. Close all open applications on the computer.
3. Insert the SMART Board software CD into your CD drive.
The CD starts automatically. Follow the on-screen instructions.
NOTE: You’ll need to use the computer’s keyboard or mouse to perform the installation, as
your interactive pen display is not touch sensitive until you install and open SMART Board
tools.
If the CD doesn’t start automatically:
– (Windows operating systems) select Start > Run and enter x:\autorun.exe (where x: is
your CD drive)
– (Mac computers) open your CD drive and double-click the installation file.
To install SMART Board software
Power Button
Power Button