Filter
Top Products
14 Installing the DT770
Orienting the Screen
To ensure that the pointer appears directly beneath your finger or the tethered pen when you touch
the DT770’s interactive screen, the computer needs to know the exact location of the image on the
screen. You can ensure the accuracy of the pointer by orienting the screen, which requires you to
touch a grid of red targets precisely using the tethered pen. Use the Quick (4 Points) orientation
level.
NOTE: If the image on the screen is distorted, match the resolution (see below) and adjust the
screen (page 29) before you orient the screen.
1. Press the SMART Board icon in the system tray, and press Control Panel.
2. Select SMART Board Settings.
The SMART Board Settings dialog box appears.
3. From the Hardware Info & Settings list, select Alignment/Orientation Precision.
4. Press Quick (4 points).
5. Press OK.
1. Press the SMART Board icon in the Dock, and press Open Control Panel.
2. Press Advanced.
3. Press the Pick Orientation Precision tab.
4. Select Quick (4 Points).
1. (Windows operating systems) Press the SMART Board icon in the system tray, and press
Orient.
(Mac computers) Press and hold the SMART Board icon in the Dock, and press Open Orient.
2. Follow the on-screen instructions.
For more details, see the SMART Board Software User’s Guide for your operating system.
To change the orientation level to Quick (4 Points) (Windows Operating Systems)
To change the orientation level to Quick (4 Points) (Mac Computers)
To orient the screen