Filter
Top Products
20 Using the DT770
Using the Room Control Interface Button
You can press the Room Control Interface button to open room control interface menus (room
control system not supplied). For information on setting the file location of the room control
software, see page 20.
NOTE: This feature is not available if your DT770 is connected to a Mac computer. Instead, if you
press the Room Control Interface button, Online Help opens.
Customizing Buttons
If your DT770 is connected to a computer running a Windows operating system, you can
customize the four function buttons, the Right-Click pen tool button and the room control interface
button.
If your DT770 is connected to a Mac computer, you can customize the Keyboard function button
and the Right-Click pen tool button
1. Press the SMART Board icon in the system tray, and press Control Panel.
2. Press Pen and Button Settings.
3. If the dialog box displays more than one SMART product, press Sympodium.
4. Press the Customize Buttons button.
The Customize Buttons dialog box appears.
5. To change the function of a particular function or pen tool button, select the arrow alongside
the appropriate graphic and select the required function.
6. To set the file location of the room control software (not supplied), press Browse. Then,
navigate to and select the required .exe file, and press Open.
7. Press OK to apply the new settings.
1. Press the SMART Board icon in the Dock, and press Open Control Panel.
2. Press Pen Tray.
To customize a button (Windows operating system)
To customize a button (Mac Computers)
The currently
selected SMART
product is
surrounded by a
blue border