Filter
Top Products
Page 32
Scenario A: Allowing SSL VPN -> LAN Connection in SonicOS Enhanced
When users have connected to the SSL VPN, they need to be able to connect to
resources on the LAN.
1. In the administration interface, navigate to the Network > Address Objects page.
2. At the bottom of the page, below the Address Objects table, click .
3. In the Add Object dialog box, create an address object for the X0 interface IP
address of your SonicWALL SSL VPN 4000:
Click OK to create the object.
4. Click again to create an address object for the NetExtender range.
5. In the Add Object dialog box, create an address object for the X0 interface IP
address of your SonicWALL SSL VPN 4000:
Name Enter a name for the SonicWALL SSL VPN 4000
Zone Assignment SSL VPN
Type Host
IP Address The SonicWALL SSL VPN 4000’s X0 IP address,
192.168.200.1 by default
Name Enter a name for NetExtender
Zone Assignment SSL VPN
Type Range
Starting IP Address The start of the NetExtender IP address range,
192.168.200.100 by default
Ending IP Address The end of the NetExtender IP address range,
192.168.200.200 by default