Filter
Top Products
1-18 (E)
BKP-7933
* If using the ANALOG ROUTING SWITCHER (BVS-V3232 etc.), connect it to PIX, WF or VBS connector
CCA-5
CABLE
CCA-5
CABLE
REMOTE
RCP/CNU
REMOTE
CCU/CNU
REMOTE
CCU/CNU
REMOTE
CCU/CNU
REMOTE
CCU/CNU
CCU 1 to 6 RCP 1 to 6
MSU
IN 1 OUT 15
REMOTE 1
REMOTE S-BUS
REMOTE 3
IN 2
IN 6
IN 13
SERIAL
OUTPUT
REMOTE
RCP/CNU
SERIAL
OUTPUT
SERIAL
OUTPUT
REMOTE
RCP/CNU
DIGITAL
ROUTING
SWITCHER
DVS-V1616
SDI MONITOR
for preview select
RCP-700 Series
CCA-5
CABLE
CCU-550 with BKP-5972
S-BUS BNC (BELDEN 8281)
CCU-700A with BKP-7311
CNU-700 with BKP-7933
MSU-700
CCU-700A with BKP-7311
VIDEO BNC
*
*
*
PIX
LINE IN etc.
RS-232C
CHARACTER
PIX WF
CONTROL TERMINAL
(IBM PC/AT COMPATIBLES)
1-7-4. Switching the Video on the Preview Monitor with the RCP PREVIEW
Switch
n
RCP must be modified in order to use this function. Refer to Section 1-9, “Modification of RCP” for
details.
Description of Operation
Set the menu as follows when you want to switch the video on the preview monitor with the RCP PRE-
VIEW switch.
The signal (LINE IN signal or on-air video signal) that is selected as the master source, is output normally
to the preview monitor. If this setting is executed, the video signal of any camera can be selected when
the RCP PREVIEW switch is pressed. This selection can be independently operated without linking with
MSU or VCS. (Linked operation becomes possible by setting the mode.)
Connecting Peripheral Equipment
1-7. Setting Up