Filter
Top Products
1-20 (E)
BKP-7933
Linking the Preview Monitor Selection with MSU and VCS
1. Select the menu item “Z:BKP-7933 CONFIGURA-
TION” and press [ENTER].
SONY ROUTING SYSTEM SETUP MENU BKP-7933 V1.00 STATION NUMBER 2
MODIFICATION COMMAND
A: SET UNIT LOCATION(CAM-CCU) B: SET UNIT LOCATION(CCU-RCP)
C: SET UNIT LOCATION(MSU)
K: RESET TO DEFAULT TABLE
MAINTENANCE COMMAND
Z: BKP-7933 CONFIGURATION
Ctrl-D RETURN
BKP-7933 CONFIGURATION BKP-7933 V1.00 STATION NUMBER 2
S-BUS CONFIGURATION
A: ROUTER PIX1 ASSIGN B: ROUTER WF1 ASSIGN
C: ROUTER PIX2 ASSIGN D: ROUTER WF2 ASSIGN
E: ROUTER PIX3 ASSIGN F: ROUTER WF3 ASSIGN
G: S-BUS TALLY H: BKP-7933 MODE
Ctrl-E RETURN TO MENU
2. Select the menu item “H:BKP-7933 MODE” and press
[ENTER].
3. Move the cursor key to the “LINK MSU” of “2 RCP
PREVIEW SWITCH” and press [ENTER].
[Notes|when|LINK|MSU|is|selected][Notes|when|LINK|MSU|is|selected]
[Notes|when|LINK|MSU|is|selected][Notes|when|LINK|MSU|is|selected]
[Notes|when|LINK|MSU|is|selected]
. It is linked to the MSU only that is connected to
CNU-700 in which the BKP-7933 is installed.
(It is not linked with the MSU that is connected to
the CNU IF board BKP-7930, nor with the MSU
that is connected to the CNU-700 in which the BKP-
7933 is not installed.)
. The RCP that is connected to the CNU-700 only is
validated.
1-7. Setting Up
BKP-7933 CONFIGURATION BKP-7933 V1.00 STATION NUMBER 2
1 SBUS TALLY SYSTEM [ OFF ] [ ON ]
2 RCP PREVIEN SWITCH [INDEPENDENCE] [ LINK MSU ]
3 CAMERA No [ CNU ] [SOURCE NAME]
4 DIAGNOSIS DISPLAY [ OFF ] [ ON ]
Ctrl-E RETURN TO MENU