Filter
Top Products
1-32 (E)
BKP-7933
1-7-9. Displaying the Self-diagnostic Information on the Terminal
Description of Operation
Set the menu as follows when you want to display the self-diagnostic information on the display. When
this setting is executed, the status of the self-diagnostics is displayed on the terminal when the self-
diagnostic information of the camera or CCU changes. The log of the self-diagnostic information can be
checked by selecting “W: SYSTEM STATUS LOG” on the BKPF-R70 menu display.
Setting from the S-BUS Primary Station
1. Select the menu item “Z:BKP-7933 CONFIGURA-
TION” and press [ENTER].
SONY ROUTING SYSTEM SETUP MENU BKP-7933 V1.00 STATION NUMBER 2
MODIFICATION COMMAND
A: SET UNIT LOCATION(CAM-CCU) B: SET UNIT LOCATION(CCU-RCP)
C: SET UNIT LOCATION(MSU)
K: RESET TO DEFAULT TABLE
MAINTENANCE COMMAND
Z: BKP-7933 CONFIGURATION
Ctrl-D RETURN
BKP-7933 CONFIGURATION BKP-7933 V1.00 STATION NUMBER 2
S-BUS CONFIGURATION
A: ROUTER PIX1 ASSIGN B: ROUTER WF1 ASSIGN
C: ROUTER PIX2 ASSIGN D: ROUTER WF2 ASSIGN
E: ROUTER PIX3 ASSIGN F: ROUTER WF3 ASSIGN
G: S-BUS TALLY H: BKP-7933 MODE
Ctrl-E RETURN TO MENU
2. Select the menu item “H: BKP-7933 MODE” and
press [ENTER].
3. Set the “4 DIAGNOSIS DISPLAY” to the ON posi-
tion using the cursor key and press [ENTER].
1-7. Setting Up
BKP-7933 CONFIGURATION BKP-7933 V1.00 STATION NUMBER 2
1 SBUS TALLY SYSTEM [ OFF ] [ ON ]
2 RCP PREVIEN SWITCH [INDEPENDENCE] [ LINK MSU ]
3 CAMERA No [ CNU ] [SOURCE NAME]
4 DIAGNOSIS DISPLAY [ OFF ] [ ON ]
Ctrl-E RETURN TO MENU