Filter
Top Products
Network Configuration
12
When using a DHCP server in your network environment
Configure settings on the “Easy” tab.
When using a DHCP server, changes to the “Advanced” tab (page 13) are unnecessary.
1 Click the “Browse” button, and specify the drive where the AIBO MIND
software “Memory Stick™” media is set (e.g. “S:” drive).
2 The name that you enter here will appear as the “AIBO Name” on the “AIBO
Search” tab (page 14). This name can be up to 8 alphanumeric characters and
must contain at least one letter.
3 Enter the network name (SSID) used by the wireless LAN access point.
(Maximum of 32 characters. Only alphanumeric characters and symbols are
allowed.)
4 Configure if using WEP (page 61). (If not using WEP, no settings are
necessary.) If using WEP, select the “Enable WEP Encryption” check box, and
enter the passkey (WEP) used by the access point. Alphanumeric passkeys
must be 5 or 13 characters. Hexadecimal passkeys must be 10 or 26
characters.
Example Configuration
5 Confirm your settings, and click this button.
Alphanumeric Hexadecimal
WEP64 (40 bit) AIBO2 4149424f32
WEP128 (104 bit) ENTERTAINMENT 454e5445525441494E4d454e54