Filter
Top Products
Using the DVD-ROM Drive
47
3
Place a DVD or CD in the tray with the label side facing up. For DVDs,
which can be played on both sides, the side of the disc facing up is the side
that plays. Push the disc onto the hub until the disc clicks into place.
4
Close the tray by pushing it gently.
Inserting a DVD/CD
✍
While using the DVD-ROM drive in the multipurpose bay, do not put the system into
Power Saving Mode. Power saving mode may not work properly and unsaved data
may be lost.
✍
Be sure to seat the disc firmly over the DVD-ROM drive hub fingers. If you do not seat
the disc firmly, you could damage your DVD-ROM drive and you may not be able to
open the tray.
When you finish using a disc, wait until the LED indicator light turns off, then press the
Eject button to remove the disc.
When the computer is in Power saving mode, you cannot remove a disc. See
“Controlling Power Management” in the online manual Customizing Your VAIO®
Notebook for more information about Power Saving modes.
If the disc does not come out when you press the Eject button, turn off the computer
and insert a thin, pointed object into the manual eject hole.
Label side facing up