Filter
Top Products
User Guide
How to Use
Windows 8: The Basics
Parts Description
Setup
Network / Internet
Connections
Settings
Playback
Backup / Recovery
Security
Other Operations
Notifications
Troubleshooting
List of Topics
Print
Personal Computer
VAIO Fit 14E/15E SVF1421/SVF1521
Changing the Rapid Wake (Sleep Mode) Settings
You can change the Rapid Wake settings in VAIO Control Center.
Rapid Wake is enabled by default. With this function, your VAIO enters Sleep
mode after your working data is saved on the built-in storage device.
1. Start VAIO Control Center and select Hardware. (See Searching/Starting
Apps, Settings, or Files to start VAIO Control Center.)
2. Enable/disable the setting in Rapid Wake.
Note
With Rapid Wake disabled:
Your working data is not saved on the built-in storage device when your VAIO
computer enters Sleep mode. Therefore, if the computer is turned off during Sleep
mode because, for example, the battery pack runs out of power or the computer
is disconnected from an AC power source, the working data will be lost. To avoid
data loss, be sure to save the data before the computer enters Sleep mode.
If your VAIO computer is equipped with the power indicator, it blinks slowly in
orange during Sleep mode. When the battery pack runs out of power during Sleep
mode, the charge indicator light blinks. If the computer is equipped with the
power indicator, it blinks along with the charge indicator.
Go to Page Top
Related Topic
Using Sleep Mode
Notes on Sleep Mode
Go to Page Top
Back Back to Top
© 2013 Sony Corporation
351
Search