Star Micronics LC-4521 Printer User Manual


 
19
Printing on fanfold paper
When printing on fanfold paper, take care not to print
too close to the perforations that separate each sheet.
The following shows the recommended print area for
fanfold paper, cut-sheet paper and label paper.
Parking fanfold paper
It is not necessary to remove fanfold paper currently
loaded in the printer in order to print on cut-sheet
paper. Instead, simply use the following procedure to
park the fanfold paper.
Tear off the paper at a perforation so there is no
more than half a page sticking out of the front
cover of the printer.
If necessary, you can press the control panel’s
ON LINE button to put the printer off-line. and
then use the LINE FEED button to feed the paper
until a perforation is just past the front cover.
Press the control panel’s ON LINE button to put
the printer off-line.
Press the control panel’s SET/EJECT/PARK
button. The printer automatically reverse feeds
the fanfold paper until it is no longer in contact
with the platen, which is indicated by the printer
beeping a number of times. Also, the control
panel’s POWER indicator starts to flash because
paper is not loaded.
Move the release lever to the cut-sheet position.
Change the paper guide to its upright position.
You can now load cut-sheet paper into the printer
using the procedures under “Manual sheet
feeding” on page123.
5 mm
8 mm (0.31")
5 mm
4 mm (0.16")
(0.2")
(0.2")
2.54 mm (0.1") min.
6.35 mm
(0.25")min.
Label
C
C
C
C
C : 2.54 mm (0.1") min.
6.35 mm
(0.25")min.
Perforation
Cut-sheet paper
Feuilles séparées
Einzelblatt
Fogli singoli
Labels
Etiquettes
Etiketten
Etichette
4 mm (0.16")
18 mm
18 mm
(0.7")
25.4 mm (1")
(0.7")
25.4 mm (1")
25.4 mm (1")
Bottom of Form
Fin de la page
Unterer Druckrand
Fine della pagina
Perforation
Ligne prédécoupée
Perforation
Perforazione
110 mm (4.3")
25.4 mm (1")
First page
Première page
Erste Seite
Primo foglio
Last page
Dernière page
Letzte Seite
Ultimo foglio
Perforation
Ligne prédécoupée
Perforation
Perforazione
Fanfold paper
Papier continu
Endlospapier
Modulo continuo