Filter
Top Products
10 Printer Setup
❏ Set the release lever on the back of the printer to the fanfold position.
❏ Set the adjustment lever to the value that matches the thickness of the paper
you are using. The setting for normal paper is 1. Set the lever to a larger
value for thicker paper, or to a smaller value for thinner paper. See the table
on page 58 for details.
❏ Unlock the tractor on the left (when viewing the printer from behind) by
pulling its gray lever up, and adjust the position of the left tractor.
Release lever
Fanfold
Cut-sheet
7
5
3
1
Adjustment lever