Filter
Top Products
EDS Mode Settings 27
Switch 5: Zero Style
Specifies whether a normal zero (ON) or a slashed zero (OFF) will be used.
Selecting Normal (ON) prints zeros without lines running through them, while
Slashed (OFF) prints zeros with a diagonal slash running through them.
Switch 6: Reserved
BANK C
Switches 1, 2: Print Mode
Turn these switches on or off to select the print mode you want to use.
Switches 3, 4, 5: Print Pitch
Turn these switches on or off to form the pattern that matches the print pitch
setting you want to make.
Switch 6: Quiet
When the Quiet Mode is enabled (OFF), the printer prints with less noise than
normal printing. Though the Quiet Mode prints more quietly, it also takes
considerably longer than normal printing.
Print Mode SW1 SW2
Draft ON ON
NLQ ON OFF
Print Pitch SW3 SW4 SW5
10cpi ON ON ON
12cpi OFF ON ON
17cpi ON OFF ON
20cpi OFF OFF ON
Proportional ON ON OFF