Filter
Top Products
8 Netra 1290 Server Installation Guide • May 2006
4. Repeat Step 1 through Step 3 for the second inner rail.
▼ To Prepare the Rails for 2-Post Installations
For 2-post installations, you can dismantle and reassemble the slide rail assemblies
(
FIGURE 1-5). The slide rail assemblies can be adjusted to suit a 19-inch 2-post rack
that has a post depth in the range of 3 to 6 inches (7.5 to 15.0 cm).
FIGURE 1-5 Slide Rail Assembly–Modified for 2-Post Installation
1. Remove the nuts that secure the adjustable bracket and discard the adjustable
bracket (
FIGURE 1-3).
2. Remove the four nuts securing the front bracket.
3. Rotate the front bracket 180 degrees and secure it facing inward (
7.).
4. Remove the four nuts that secure the rear bracket.
5. Rotate the rear bracket 180 degrees so that it faces inward (
7.).
6. Align the rear bracket to the appropriate markings on the slide rail assembly and
secure the rear bracket.
7. Repeat Step 1 through Step 6 for the second slide rail assembly.
2-Post 3" Position
2-Post 4" Position
2-Post 6" Position
Sunfire Cabinet
NGR Cabinet
Storedge Cabinet
Rear bracket
Front bracket
(facing inwards)
(facing inwards)
Slide rail assembly