Filter
Top Products
Chapter 5 Configuring Sun ONE Server Software for Use With the Sun Crypto Accelerator 4000 Board 91
4. Create a user with the create user command.
The username and password created here collectively make the username:password (See
TABLE 5-1). You must use this password when authenticating during a web server
startup. This is the keystore password for a single user.
Caution – Users must remember this username:password. Without this password,
users cannot access their keys. There is no way to retrieve a lost password.
5. Exit vcaadm.
Overview for Enabling Sun ONE Web Servers
To enable Sun ONE Web Servers you must complete the following procedures,
which are explained in detail in the next two sections.
■ Install the Sun ONE Web Server
■ Create a trust database.
■ Request a certificate.
■ Install the certificate.
■ Configure the Sun ONE Web Server.
Caution – These procedures must be followed in the order given. Failure to do so
may result in an incorrect configuration.
■ If you are using Sun ONE Web Server 4.1, go to “Installing and Configuring Sun
ONE Web Server 4.1” on page 92.
■ If you are using Sun ONE Web Server 6.0, go to “Installing and Configuring Sun
ONE Web Server 6.0” on page 101.
vcaadm{vcaN@hostname, sec_officer}> create user username
Initial password:
Confirm password:
User username created successfully.
vcaadm{vcaN@hostname, sec_officer}> exit