Filter
Top Products
92 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003
Installing and Configuring Sun ONE
Web Server 4.1
This section explains how to install and configure Sun ONE Web Server 4.1. This
chapter includes the following sections:
■ “Installing Sun ONE Web Server 4.1” on page 92
■ “Configuring Sun ONE Web Server 4.1 for SSL” on page 99
Installing Sun ONE Web Server 4.1
You must perform these procedures in order. Refer to the Sun ONE Web Server
documentation for more information about using Sun ONE Web Servers.
▼ To Install Sun ONE Web Server 4.1
1. Download the Sun ONE Web Server 4.1 software.
You can find the web server software at the following URL:
http://www.sun.com/
2. Install the web server.
This section includes instructions for one example, you may decide to configure
your Sun ONE Web Server differently. The default path name for the server is:
/usr/netscape/server4
Accept the default path during the Sun ONE Web Server installation. This document
refers to the default paths. If you decide to install the web server software in a
different location, be sure to note where you installed it.
3. Run the setup program.
4. Answer the prompts in the installation script.
Except for the following prompts, you can accept the default for ease of use.
a. Agree to accept the license terms by typing yes.
b. Enter a fully qualified hostname.domain.
c. Enter the Sun ONE Web Server 4.1 Administration Server password twice.
d. Press Return when prompted.