Filter
Top Products
134 Sun Crypto Accelerator 4000 Board Installation and User’s Guide • May 2003
watch-net
To monitor a network connection: from the OBP prompt, type the apply watch-
net command with the device path:
The system monitors network traffic, displaying “.” each time it receives an error-
free packet and “X” each time it receives a packet with an error that can be detected
by the network hardware interface.
ok apply watch-net /pci@8,600000/network@1
/pci@8,600000/network@1: 1000 Mbps full duplex link up
Watch ethernet packets
’.’ is a good packet and ’X’ is a bad packet
Press any key to stop
.....X...X......X.....