Filter
Top Products
Chapter 5 Configuring Sun ONE Server Software for Use With the Sun Crypto Accelerator 4000 Board 109
■ Port: Set to the port on which you will be running your SSL-enabled web
server (usually this is port 443).
■ Security: Set to On.
b. Select the OK button to apply these changes.
In the security field of the Edit Listen Sockets page, there should now be an
Attributes link.
3. Select the Attributes link.
4. Enter the username:password to authenticate to the keystore on the system.
5. If you want to change the default set of ciphers, select the cipher suites under the
Ciphers heading.
A dialog box is displayed for changing cipher settings. You can select either Cipher
Default settings, SSL2, or SSL3/TLS (Transmission Layer Security). If you select the
Cipher Default, you are not shown the default settings. The other two choices
require you to select the algorithms you want to enable in a pop-up dialog box.
Refer to your Sun ONE documentation on cipher selection.
6. Select the certificate for the keystore followed by: Server-Cert (or the name you
chose if it is different).
Only keys that the appropriate keystore user owns appear in the Certificate Name
field. This keystore user is the user that is authenticated with the username:password.
7. When you have chosen a certificate and confirmed all the security settings, select
the OK button.
8. Select the Apply link in the far upper right corner to apply these changes before
you start your server.
9. Select the Load Configuration Files link to apply the changes.
You are redirected to a page that allows you to start your web server instance.
If you select the Apply Changes button when the server is off, an authentication
dialog box prompts you for the username:password. This window is not resizable, and
you might have a problem submitting the change.
There are two workarounds for this problem:
■ Select the Load Configuration Files instead.
■ Start up the web server first, and select the Apply Changes button.
10. In the Sun ONE Web Server 6.0 Administration Server window, select the On/Off
link on the left side of the window.
11. Enter the passwords for the servers and select the OK button.
You are prompted for one or more passwords. At the Module Internal prompt,
provide the password for the web server trust database.