Filter
Top Products
52 Sun StorEdge 5210 NAS Quick Reference Manual • November 2004
To enable LDAP service on the Sun StorEdge 5210 NAS:
1. In the navigation panel, select UNIX Configuration> Set Up NSSLDAP.
FIGURE 6-1 The Set Up NSSLDAP Panel
2. To enable LDAP, check the Enable NSSLDAP checkbox.
3. In the Domain field, enter the domain name of the LDAP server, e.g., foo.com.
4. In the Password field, enter the password set on the LDAP server.
5. In the Server field, enter the IP address fo the LDAP server.
6. In the Proxy field, enter the proxy domain, depending on the server settings.
7. Click Apply to save the settings.
Setting Up NIS
The Set Up NIS panel allows you to enable Network Information Service (NIS) and
specify the domain name and server IP address.