Sunway NT 10000 Power Supply User Manual


 
101
Electrical Safety
Prior to opening the housing, disconnect
the Solar Inverter from the electricity of
the grid and the PV generator.
After disconnection from the PV generator
and the grid, there is still lethal voltage
inside the Solar Inverter and at the
PV generator hubs for approximately five
minutes. It takes that long for the energy-
storing capacitors to fully discharge.
After having disconnected the Solar Inver-
ter from the grid and the PV generator,
wait at least five minutes before opening
the Solar Inverter.
Mechanical Safety
During assembly, make sure the cables
or connecting lines attached to the Solar
Inverter are installed safely and suitable
mechanical cable retaining devices (e. g.
cable channels) are used.
2.1 Safety Instructions
!
GB
BP13370_NT_10000_englisch 23.11.2005 17:40 Uhr Seite 17