Filter
Top Products
Declaration of Conformity to EMC Directive 89/336/EEC, Including Changes 91/263/EEC
and 93/68/EEC
We hereby declare that the product described below conforms to the provisions of EU
Directive 89/336/EEC (EMC Directive with changes 91/263/EEC and 93/68/EEC):
Product
Manufacturer
Type
As from manufacturing date
Applied standards
Standard
Solar Inverter
Sunways AG, Photovoltaic Technology
Macairestr. 3-5, D - 78467 Konstanz, Germany
Sunways NT 10000
15 September 2005
EN 50082-2 (EN 61000-4-2, -4-3, -4-4, -4-6, -4-8)
EN 55014-1; EN 55011; EN 61000-3-2;
EN 61000-3-3; E DIN VDE 0126-1-1
Comments
The adherence to the EMC guideline presupposes an installation of the components in the system or machine, which is suitable
for EMC. The installation instructions in the technical documents are to be observed. The checks follow for an installation,
which is typical for the system on a measuring station, which conforms to the norms. The legal requirements for the stability
and the emitted interference, limit values and norms are listed in the documentation named above. The Sunways products are
intended for the installation in a PV system. The check results are not transferable in all cases to the installed condition in the
PV system. This declaration therefore does not contain the assurance of EMC characteristics of the final product. Changes reser-
ved. The currently valid issue is available upon request.
161
Place, date Roland Burkhardt, Executive Board
Constance, 13 Sept. 2005
GB
BP13370_NT_10000_englisch 23.11.2005 17:40 Uhr Seite 77