Filter
Top Products
4-4
X7DCL-3/X7DCL-i User's Manual
SATA Port 1 ~ SATA Port 6, Ext. Primary Master/Slave
These settings allow the user to set the parameters of the slots indicated above.
Press <Enter> to activate the following submenu screen for detailed options of
these items. Set the correct congurations accordingly. The items included in the
submenu are:
Type
This option allows the user to select the type of IDE hard drive. The option Auto
allows the BIOS to automatically congure the parameters of the HDD installed at
the connection. Enter a number between 1 to 39 to select a predetermined HDD
type. Select User to allow the user to enter the parameters of the HDD installed.
Select CDROM if a CDROM drive is installed. Select ATAPI if a removable disk
drive is installed.
Multi-Sector Transfers
This item allows the user to specify the number of sectors per block to be used
in multi-sector transfer. The options are Disabled, 4 Sectors, 8 Sectors, and
16 Sectors.
LBA Mode Control
This item determines whether the Phoenix BIOS will access the IDE Channel 0
Master Device via the LBA mode. The options are Enabled and Disabled.