Filter
Top Products
4-10
X7DCL-3/X7DCL-i User's Manual
PCIConguration
Access the submenu to make changes to the following settings for PCI devices.
Onboard GLAN-1/Onboard GLAN-2 (Gigabit- LAN) OPROM
Congure
Select Enabled to allow the system to boot from the GLAN-1 connection or the
GLAN-2 connection. The options are Disabled and Enabled.
OnboardStorageOPROMCongure
Select Enabled to allow the system to boot from the onboard storage device. The
options are Disabled and Enabled.
ResetCongurationData
If set to Yes, this setting clears the Extended System Conguration Data- (ESCD)
area. The options are Yes and No.
Slot1 PCI 33MHz, Slot2 PCI 33MHz, Slot3 PCI 33MHz, Slot4 PCI-Exp.
x4, Slot5 PCI-Exp. x8, and Slot6 PCI-Exp. x8
Access the submenu for each of the settings above to make changes to the
following:
Option ROM Scan
When enabled, this setting will initialize the device expansion ROM. The options
are Enabled and Disabled.
Enable Master
This setting allows you to enable the selected device as the PCI bus master.
The options are Enabled and Disabled.
Latency Timer
This setting allows you to set the clock rate for Bus Master. A high-priority, high-
throughout device may benet from a greater clock rate. The options are Default,
0020h, 0040h, 0060h, 0080h, 00A0h, 00C0h, and 00E0h. For Unix, Novell and
other Operating Systems, please select the option: other. If a drive fails after
the installation of a new software, you might want to change this setting and
try again. A different OS requires a different Bus Master clock rate.
Large Disk Access Mode
This setting determines the size of hard drive disk to be accessed by the system.
The options are DOS or Other (for Unix, Novelle NetWare and other operating
systems).