Filter
Top Products
Standard commands Controlling the configuration of the printer
T5023/5023+ - Programming Guide 47
Setting the MSB to 0.
Function:
ESC = sets the most significant bit (MSB) of all incoming data to 0 (zero). Thus it is
possible to print characters of the standard code table even for programs on compu-
ters which only transfer 7- bit data.
ESC
27
1B
=
61
3D
ASCII character
Decimal
Hexadecimal
The MSB setting via ESC = is deleted by the following ESC seuences:
– ESC @ (Initializing the printer)
– ESC > (Setting the most significant bit)
– ESC # (Deleting the MSB specification)
.
i