Filter
Top Products
Standard commands Line feed commands
T5023/5023+ - Programming Guide 55
Line feed commands
The standard line spacing amounts to six lines per inch, i. e. the line spacing is
1/ 6 inch.
The line spacing can be changed using the following commands, whereby the smal-
lest unit for the line spacing is 1/ 180 inch. The corresponding line feed is carried out
depending on the set line spacing:
Command Function
LF
Line feed
ESC J (n)
Carrying out an n/180 inch line feed
ESC 0
Determining 1/8 inch line spacing
ESC 2
Determining 1/6 inch line spacing
ESC 3 (n)
Determining 1/180 inch line spacing
ESC A (n)
Determining1/60inchlinespacing
ESC + (n)
Determining 1/360 inch line spacing