Filter
Top Products
Standard commands Vertical print control
T5023/5023+ - Programming Guide 71
Determining / deleting vertical tabs (channel 0)
Function:
– Setting tabs
Using ESC B ... NUL up to 16 vertical tabs can be determined in the relevant
line spacing. Subsequent alterations in the line spacing do not affect this.
The tab values are entered as n1, n2 (number of lines), etc. from 1 up to and
including 255 in ascending order. The sign NUL marks the end of the com-
mand.
– Deleting tabs
Via ESC B NUL the set tabs are deleted (NUL characters directly after
ESC B).
ESC
27
1B
B
66
42
(n1)
n1
n1
(n2)
n2
n2
...
...
...
NUL
0
00
ASCII character
Decimal
Hexadecimal
–UsingESC B ... NUL the tabs are set in channel 0.
– If more than one set of tabs is to be defined, this must occur via
ESC b (small b).
– A vertical tab jump occurs via the command VT (for ASCII decimal
11, hex 0B).
i