Filter
Top Products
D14128.02—NOVEMBER 2008
37
Codec C90
System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us
About the API
Formats for values types
Value types and formats
The system supports the following value types:
Integer values•
Literal values•
String values•
E164 string values (strings only containing digits, ‘#’ and ‘*’)•
IPv4 Address values•
IPv6 Address values•
IPv4 or IPv6 Address values•
Integer values:<x..y>
Defines the valid range for an integer input. x = min value, y = max value.
<1..100>
Literal values: <X/Y/../Z>
Defines the possible values for a given configuration.
<On/Off/Auto>
String values: <S: x, y>
Defines that the valid input for this configuration is a String with minimum length x and maximum length of y characters.
<S: 0, 49>
IPv4 Address values: <IPAddr>
Defines that the input must be an IPv4 address.
<IPAddr>
IPv6 Address values: <IPv6Addr: x, y>
Defines that the input must be an IPv6 address with minimum length x and maximum length y.
<IPv6Addr: 0, 43>
IPv4 or IPv6 Address values: <IPv4v6Addr: x, y>
Defines that the input must be an IPv4 or IPv6 address with minimum length x and maximum length y.
<IPv4v6Addr: 0, 43>