Filter
Top Products
D14128.02—NOVEMBER 2008
67
Codec C90
System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us
xCommand
xCommand Boot
Boot system.
Example:
xCommand Boot
*r BootResult (status=OK):
*r/end
OK
CUIL reboot request, restarting
Connection closed by foreign host.
xCommand Call DisconnectAll
Disconnect all calls.
Example:
xCommand Call DisconnectAll
OK
*r DisconnectAllResult (status=OK):
*r/end
xCommand Call Accept
Accept incoming call. If no call id is specified, all incoming calls will be accepted.
Required parameters with (r):
CallId: <0..65534>
Example:
xCommand Call Accept CallId:19
OK
*r CallAcceptResult (status=OK):
*r/end
The Boot command
The Call commands
xCommand Call Disconnect
Disconnect specified call.
Required parameters with (r):
CallId(r): <0..65534>
Example:
xCommand Call Disconnect CallId:17
OK
*r DisconnectCallResult (status=OK):
*r/end