Filter
Top Products
D14128.02—NOVEMBER 2008
90
Codec C90
System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us
xStatus
xStatus Audio Input LocalInput [1..n] Name
States the name of the LocalInput with InputId n
Value space: S: 0..100
Default value: N/A
Example: *s Audio Input LocalInput 1 Name: “Microphone”
xStatus Audio Input LocalInput [1..n] MixerMode
A LocalInput is a group of connectors mixed together by the stated mixermode
Value space: Auto/Fixed
Default value: N/A
Example: *s Audio Input LocalInput 1 MixerMode: “Auto”
xStatus Audio Input LocalInput [1..n] Mute
States whether the LocalInput is muted
Value space: On/Off
Default value: N/A
Example: *s Audio Input LocalInput 1 Mute: “Off”
xStatus Audio Input LocalInput [1..n] Channels
States whether the LocalInput is a mono or multichannel signal
Value space: 1..2
Default value: N/A
Example: *s Audio Input LocalInput 1 Channels: 1
xStatus Audio Input LocalInput [1..n] AGC
States whether Automatic Gain Control is enabled on the LocalInput
Value space: On/Off
Default value: N/A
Example: *s Audio Input LocalInput 1 AGC: “On”
xStatus Audio Input LocalInput [1..n] Connector
States the connectors mixed together in the LocalInput
Value space: Microphone/Line/HDMI.1..8
Default value: N/A
Example: *s Audio Input LocalInput 1 Connector: “Microphone.1”
xStatus Audio Input RemoteInput [1..n] CallId
The remote audio input belongs to call with this id
Value space: Integer value
Default value: N/A
Example: *s Audio Input RemoteInput 23 CallId: 11
xStatus Audio Input RemoteInput [1..n] AGC
States whether Automatic Gain Control is enabled on the RemoteInput
Value space: On/Off
Default value: N/A
Example: *s Audio Input RemoteInput 23 AGC: “Off
The Call status
xStatus Call [1..n] Status
Status of call.
Value space: Dialling/Connecting/Ringing/Connected/Idle
Default value: N/A
Example: *s Call 11 Status: Connected
xStatus Call [1..n] Direction
Direction of call initiation.
Value space: Incoming/Outgoing
Default value: N/A
Example: *s Call 11 Direction: Outgoing
xStatus Call [1..n] Protocol
Call protocol. H323 or SIP.
Value space: H323/SIP
Default value: N/A
Example: *s Call 11 Protocol: “h323”