Filter
Top Products
D14128.02—NOVEMBER 2008
71
Codec C90
System Integrator Guide
Contents Introduction Getting Started Interfaces About the API xConfiguration xCommand xStatus Cameras Appendices Contact us
xCommand
xCommand Camera ReconfigureCameraChain
Reinitialize camera chain. Get info about what camera is sitting in what position in the camera chain.
Example:
xCommand Camera ReconfigureCameraChain
*r ReconfigureCameraChainResult (status=OK):
*r/end
OK
xCommand Camera TriggerAutofocus
Trigger auto focus.
Required parameters with (r):
CameraId(r): <1..7>
Example:
xCommand Camera TriggerAutofocus CameraId:1
OK
*r TriggerAutofocusResult (status=OK):
*r/end
xCommand Dial
Dial out from the system.
Required parameters with (r):
Number(r): <S: 0, 255>
Protocol: <H323/Sip>
CallRate: <64..6000>
Example:
xCommand Dial Number:543210 Protocol:h323
OK
*r DialResult (status=OK):
CallId: 2
ConferenceId: 1
*r/end
The Dial command