Filter
Top Products
Communication Link 105
4. On the other unit, press y 8 ~ to display the RECEIVE menu.
5. Press Í on the receiving unit.
6. Press Í on the sending unit. A copy of the selected item(s) is sent
to the receiving unit.
7. Disconnect the link cable only from the receiving unit and connect it
to another unit.
8. Press y 8 on the sending unit.
9. Select only the data type. For example, if the unit just sent a list,
select
4:LIST.
Note: The item(s) you want to send are pre-selected from the last
transmission. Do not select or deselect any items. If you select or
deselect an item, all selections or deselections from the last
transmission are cleared.
10. Press ~ on the sending unit to display the
TRANSMIT menu.
11. On the new receiving unit, press y 8 ~ to display the RECEIVE
menu.
12. Press Í on the receiving unit.
13. Press Í on the sending unit. A copy of the selected item(s) is sent
to the receiving unit.
14. Repeat steps 7 through 13 until the items are sent to all additional
units.
Sending to a TI-83 Plus or TI-83 Plus Silver Edition
You can send all variables from a TI-84 Plus to a TI-83 Plus or TI-83 Plus
Silver Edition except Flash applications with new features, or programs
with new features in them.
If archived variables on the TI-84 Plus are variable types recognized and
used on the TI-83 Plus or TI-83 Plus Silver Edition, you can send these
variables to the TI-83 Plus or TI-83 Plus Silver Edition. They will be
automatically sent to the RAM of the TI-83 Plus or TI-83 Plus Silver Edition
during the transfer process. It will send to archive if the item is from
archive.
To send data to a TI-83 Plus or TI-83 Plus Silver Edition:
1. Use an I/O unit-to-unit cable to link the two units together.
2. Set the TI-83 Plus or TI-83 Plus Silver Edition to receive.
3. Press y 8 on the sending TI-84 Plus to display the
LINK SEND
menu.