Filter
Top Products
106 Communication Link
4. Select the menu of the items you want to transmit.
5. Press ~ on the sending TI-84 Plus to display the LINK TRANSMIT
menu.
6. Confirm that the receiving unit is set to receive.
7. Press Í on the sending TI-84 Plus to select
1:Transmit and begin
transmitting.
Receiving Items
LINK RECEIVE Menu
To display the LINK RECEIVE menu, press y 8 ~.
Receiving Unit
When you select 1:Receive from the LINK RECEIVE menu on the
receiving unit, the message
Waiting... and the busy indicator are
displayed. The receiving unit is ready to receive transmitted items. To exit
the receive mode without receiving items, press É, and then select
1:Quit from the Error in Xmit menu.
When transmission is complete, the unit exits the receive mode. You can
select
1:Receive again to receive more items. The receiving unit then
displays a list of items received. Press y 5 to exit the receive mode.
DuplicateName Menu
During transmission, if a variable name is duplicated, the
DuplicateName menu is displayed on the receiving unit.
When you select
1:Rename, the Name= prompt is displayed, and alpha-
lock is on. Enter a new variable name, and then press Í. Transmission
resumes.
When you select
2:Overwrite, the sending unit’s data overwrites the
existing data stored on the receiving unit. Transmission resumes.
SEND RECEIVE
1:Receive
Sets unit to receive data transmission.
DuplicateName
1: Rename
Prompts to rename receiving variable.
2: Overwrite
Overwrites data in receiving variable.
3: Omit
Skips transmission of sending variable.
4: Quit
Stops transmission at duplicate variable.