Filter
Top Products
TVP5158EVM Evaluation Procedures
www.ti.com
7.3 Evaluation of Pixel-Interleaved Digital Video Output Modes
The TVP5158EVM can be programmed for pixel-interleaved modes as described below. The DM6467
DaVinci HD EVM does not support pixel interleave modes, so a different back-end processor is required
for this evaluation.
1. In the VCC System Initialization dialog box, click the Browse button. The Open dialog box shown in
Figure 14 appears. Double-click the following file:
TVP5158EVM_Pixel_Interleave_Setup.CMD
2. The dataset descriptions table should now appear as shown in Figure 17. Click once on the following
table entry:
Multi-Standard, Pixel-Interleave, 2-Ch D1, 8-bit @ 54MHz (OCLK_P, OCLK_N @ 27MHz, Opposite
Phase)
Click the PROGRAM button. The TVP5158 is now programmed to automatically detect the video
standard received at the input and output video in the above pixel-interleaved format.
Figure 17. System Initialization for Pixel Interleave Modes
24
TVP5158 Evaluation Module SLEU108–November 2009
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated