Filter
Top Products
VCC Software in Depth
www.ti.com
8.4.4 Editing Tools vs Video Decoder Write Enables
The behavior of the System Initialization, Edit Register Map and Property Sheets tools regarding the
decoder write enables is described in Table 12.
Figure 19. VCC Main Window – Configured for Broadcast Write Access (default)
Figure 20. VCC Main Window – Configured for Single Video Decoder Write Access
Table 12. Editing Tools vs Video Decoder Write Enables
Editing Tool Reads From Writes To Writes What
Command File N/A Write Enabled decoders I2C register values
(can be overridden in cmd file)
Edit Register Map Selected Decoder Write Enabled decoders 1 byte – same data to all
Edit Property Sheets Selected Decoder Write Enabled decoders Bit fields that changed on the selected
decoder
8.5 Example TVP5158 Property Pages
Example property pages are shown in Figure 21 through Figure 24.
Some of the controls for the Output Formatter (OFM) page only exist for video decoder 1. Figure 21
shows the OFM page when Decoder 1 is the selected decoder. Figure 22 shows the OFM page when
Decoder 4 is the selected decoder (some of the OFM controls are not visible). They would also not be
visible for Decoder 2 and Decoder 3. To change the Port A selection, for example, Decoder 1 must be the
selected decoder.
The Audio property page only exists for video decoder 1. To access the Audio controls Decoder 1 must be
the selected decoder.
28
TVP5158 Evaluation Module SLEU108–November 2009
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated