Filter
Top Products
User's Guide
SLEU108–November 2009
TVP5158 Evaluation Module
1 Description
The TVP5158EVM evaluation module is a printed circuit board designed for evaluation of the TVP5158
Four-Channel PAL/NTSC Video Decoder. The TMS320DM6467 DVEVM (digital video evaluation module)
can be used with the TVP5158EVM as a back-end video processor. This user guide outlines the
necessary hardware and software setup required to provide full evaluation of the TVP5158.
1.1 Functional Overview
TVP5158EVM is powered by a single 5-V universal supply. The TVP5158EVM allows the user to have up
to four composite video inputs and up to four audio inputs. Analog YPbPr component video output is
supported for non-interleaved video modes. Digital video is output to the DaVinci HD EVM in a single or
dual ITU-R BT.656 configuration or in ITU-R BT.601 (16-Bit) configuration for evaluation of line-interleaved
modes.
The TVP5158EVM uses one PC USB port to provide I2C communication with the TVP5158, THS8200
Video/Graphics Triple DAC and the TLV320DAC32 Stereo Audio DAC devices on the TVP5158EVM. The
Video Control Center (VCC) application software is provided for control and evaluation of the
TVP5158EVM. A VT100 terminal program is required to connect to the DaVinci HD EVM via UART to
send Linux shell commands to control the DSP.
1.2 Notational Conventions
This document uses the following conventions.
The TMS320DM6467 Digital Video Evaluation Module is usually referred to as the DaVinci HD EVM.
The TMS320DM6467 Digital Media System-on-Chip is usually referred to as the DM6467.
6
TVP5158 Evaluation Module SLEU108–November 2009
Submit Documentation Feedback
Copyright © 2009, Texas Instruments Incorporated