Filter
Top Products
System Management
The System menu gives you a wealth of settings that you can use to configure
your N299’s system administration functions. You can set up system notifications,
view system logs, and even upgrade firmware from this menu.
System Notifications
From the System menu, choose the
Notification item, and the
Notification Configuration screen
appears. This screen lets you have
the N299 notify you in case of any
system malfunction. Press Apply to
confirm all settings. See following
table for a detailed description of
each item.
Notification Configuration
Item Description
Beep Notification Enable or disable the system beeper that beeps when a problem
occurs.
Email Notification Enable or disable email notifications of system problems.
SMTP Server Specifies the hostname/IP address of the SMTP server.
Port Specifies the port to send outgoing notification emails.
Auth Type Select the SMTP Server account authentication type.
Sender Address Set the sender mail address.
Sender Password Enter the password for the sender’s mail account.
Confirm Password Confirm a new password.
Receivers’ E-mail
Address
Add one or more recipient’s email addresses to receive email
notifications.
Send Test Mail Click to send out a test e-mail to make sure the settings are
correct.
Consult with your mail server administrator for email server information.
NOTE
System Logs
From the System menu, choose the
Logs item and the System Logs
screen appears. This screen shows a
history of system usage and
important events such as disk status,
network information, and system
booting. See the following table for a
detailed description of each item:
37