Filter
Top Products
Troubleshooting and Routine Maintenance
99
b Pull out the jammed paper (1).
If you cannot remove the jammed
paper from the front, or the error
message still appears on the LCD
after you have removed the jammed
paper, please go to the next step.
c Remove the Jam Clear Cover (1). Pull
the jammed paper out of the machine.
d Put the Jam Clear Cover back on.
Make sure the cover is set properly.
e Lift the scanner cover (1) from the front
of the machine until it locks securely into
the open position.
Make sure that there is no jammed
paper left inside the machine. Check
both ends of the print carriage.
Note
If the paper is jammed under the print
head, unplug the machine from the power
source, then move the print head to take
out the paper.
1
1
1