Filter
Top Products
Making copies
57
10
To enlarge or reduce the next copy follow the
instructions below:
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Copy Options and a or b to
choose Enlarge/Reduce.
Press OK.
e Choose one of the options below:
Use a or b to choose the
enlargement or reduction ratio you
want. Press OK.
Use a or b to choose Custom (25–
400%). Press OK. Use the dial pad
to enter an enlargement or reduction
ratio from 25% to 400%. (For
example, press 5 3 to enter 53%.)
Press OK.
f Press Mono Start or Colour Start.
Note
Page Layout Options 2 in 1(P), 2 in 1(L),
4 in 1(P), 4 in 1(L) or Poster are not
available with Enlarge/Reduce.
Making N in 1 copies or a
poster 10
You can reduce the amount of copies by
using the N in 1 copy feature. This allows you
to copy two or four pages onto one page,
which allows you to save paper.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to make a poster, use the
scanner glass.
Important 10
Please make sure paper size is set to A4.
You can not use the Enlarge/Reduce
setting with the N in 1 and Poster features.
N in 1 colour copies are not available.
(P) means Portrait and (L) means
Landscape.
You can only make one poster copy at a
time.
a Make sure you are in Copy mode .
b Load your document.
c Use the dial pad to enter the number of
copies (up to 99).
d Press Copy Options and a or b to
choose Page Layout.
Press OK.
e Press a or b to choose
Off(1 in 1), 2in1(P),
2in1(L), 4in1(P),
4in1(L) or Poster(3 × 3).
Press OK.
f Press Mono Start to scan the
document. You can also press Colour
Start if you are using Poster layout.
If you are making a poster or placed the
document in the ADF, the machine
scans the pages and starts printing.
If you are using the scanner glass, go
to g.
g After the machine scans the page, press
1 to scan the next page.
Next Page?
1.Yes 2.No