Filter
Top Products
Printing photos from a memory card
63
11
The PhotoCapture key will light to show the
memory card status. It can be on, off or
blinking. See the table below for what the light
means.
On
A memory card is inserted correctly.
Off
No memory card is present, or it is
incorrectly inserted.
Blinking
The inserted memory card is being read,
or is being written to.
CAUTION
DO NOT unplug the power cord or remove
the memory card from the media drive (slot)
while the machine is reading or writing to
the card (the PhotoCapture key is
blinking). You will lose your data or
damage the card.
The machine can only read one memory card
at a time so do not put more than one card in
a slot.
Memory card folder structure 11
Your machine is designed to be compatible
with modern digital camera image files and
memory cards; however, please read the
points below to avoid errors:
The DPOF file on the memory card must
be in a valid format. (See DPOF printing
on page 66.)
The image file extension must be. JPG
(Other image file extensions like. JPEG,
.TIF, .GIF and so on will not be recognized).
Walk-up PhotoCapture Center™ printing
must be performed separately from
PhotoCapture Center™ operations using
the PC. (Simultaneous operation is not
available.)
IBM Microdrive™ is not compatible with
the machine.
The machine can read up to 999 files on a
memory card.
CompactFlash
®
Type II is not supported.
This product supports xD-Picture Card™
Type M / Type H (Large Capacity).
Please be aware of the following:
When printing the INDEX or IMAGE, the
PhotoCapture Center™ will print all the
valid images, even if one or more images
have been corrupted. A portion of the
corrupted image may be printed.
Your machine is designed to read memory
cards that have been formatted by a digital
camera.
When a digital camera formats a memory
card it creates a special folder into which it
copies image data. If you need to modify
the image data stored on a memory card
with your PC, we recommend that you do
not modify the folder structure created by
the digital camera. When saving new or
modified image files to the memory card
we also recommend you use the same
folder your digital camera uses. If the data
is not saved to the same folder, the
machine may not be able to read the file or
print the image.