Filter
Top Products
1
2
3
4
5
6
7
8
9
10
11
12
9-28
WHEN THE GRAPHIC SYMBOLS FLASH ON THE TOUCH PANEL
When the CALL SERVICE symbol flashes, the following message appears and copying is no longer
possible. Call your service technician.
Call for service
When the CALL SERVICE or CLEAR PAPER symbol is flashing, if you press the
c
Clear key and
the digital key 8 together, the corresponding error code will appear on the copy quantity display only
while both keys are held down. Please give the error code in addition when you are asking for service.
Since heaters are used to fix toner images to the copy paper, a safety circuit is incorporated in this
copier. After you turn on the power switch, if a certain temperature is not attained within a specified period of
time, the safety circuit assumes that something abnormal has happened, causing the copier to stop its
operation. This can possibly occur when the temperature is low even if the copier is not malfunctioning. If
this occurs, turn the power switch off and then on again. Repeat this procedure twice, and if the problem still
persists, turn off the power switch and call for service.
9. CALL SERVICE SYMBOL