Filter
Top Products
105
Learning the Basics
Using Hibernation
5.375 x 8.375 ver 2.4.0
❖ When I close the lid
Set this option to Power Off if you want the computer
to turn off when you close the display panel.
8 Click Override all Modes with settings here.
The Set the range window appears.
Sample Set the range window with DC only option
9 Do one of the following:
❖ Click DC only if you want the settings to apply only
when you are using battery power.
❖ Click All for the settings to apply whether you are
using battery power or outlet power.
10 Click OK to close the Normal Power Properties window.
11 Click OK to close the TOSHIBA Power Saver Properties
window, then close the Control Panel.
Starting again after Turn Off or Shut down
To start the computer up again, press and release the power
button; the on/off light changes to green.
Using Hibernation
When Hibernation is enabled, you can put the computer into
Hibernation in more than one way.