Filter
Top Products
e-STUDIO281c/351c/451c
(3) Enter adjustment mode [05]. Change the values for codes [604 to 606], [1737 to 1741] and [1757] to adjust
the sharpness intensity.
* Decreasing the sharpness intensity will minimize moiré.
Color mode Original mode [05] code Value recommended
Acceptable
value range
Default
Text/Photo 05-604
Text 05-605
Black
Photo 05-606
Set a value smaller than 16. 0 to 31 0
Text/Photo 05-1737
Text 05-1738
Printed image 05-1739
Photo 05-1740
Full color
Map 05-1741
Set a value smaller than 16. 0 to 31 0
Auto color Text/Photo 05-1757 Set a value smaller than 16. 0 to 31 0
* Setting "1" provides the softest image, while setting "31" provides the sharpest image. The default value
("0") provides an image as sharp as the one provided by setting "16."
Changing the values for these codes will change the sharpness intensity, when the "Sharpness" indicator in
the "IMAGE" menu is set to the center. Remember that 1 step of the indicator will increase or decrease the
sharpness intensity by 3. If the sharpness intensity of the center value is changed, each step of the indicator
will be changed accordingly. (For instance, if the center value is increased by 5 (sharper), the value of each
step of the indicator will also be increased by 5 (sharper).)
<Note> "Minimizing moiré" and "Sharpening the copy image" are mutually contradictory. When the
adjustment is performed to minimize moiré, the resolution of the copy image may decrease.
2. Copier-specific Adjustments
2.8