Toshiba 351C Copier User Manual


 
e-STUDIO281c/351c/451c
2.18 To Adjust the Image Quality Scanned from the RADF
Before the adjustment After the adjustment
The reproducibility of background may vary,
depending on how to scan an original.
The gap in the reproducibility of background
is reduced.
Explanation
The reproducibility of background may vary, depending on the type of original, or whether to scan an original
placed on the original glass or fed from the RADF (MR-3018). Adjust the reproducibility of background, while
scanning an original fed from the RADF, in order to minimize the gap in the reproducibility of background,
using either of how to scan an original.
* Before performing this adjustment, make sure that the copier and RADF are correctly adjusted. Therefore,
perform all the necessary adjustments. Only if further adjustment is still desired for the reproducibility of
background, perform this adjustment.
To scan an original placed on the original glass
To scan an original fed from the RADF
To scan an original placed on the original glass
To scan an original fed from the RADF
2. Copier-specific Adjustments
2.18