Filter
Top Products
e-STUDIO281c/351c/451c
(3) Enter adjustment mode [05]. Change the values for codes [604 to 606], [1737 to 1741] and [1757] to adjust
the sharpness intensity.
* Increasing the sharpness intensity will enhance the edges of the image.
Color mode Original mode [05] code Value recommended
Acceptable
value range
Default
Text/Photo 05-604
Text 05-605
Black
Photo 05-606
Set a value larger than 16. 0 to 31 0
Text/Photo 05-1737
Text 05-1738
Printed image 05-1739
Photo 05-1740
Full color
Map 05-1741
Set a value larger than 16. 0 to 31 0
Auto color Text/Photo 05-1757 Set a value larger than 16. 0 to 31 0
* Setting "1" provides the softest image, while setting "31" provides the sharpest image. The default value
("0") provides an image as sharp as the one provided by setting "16."
Changing the values for these codes will change the sharpness intensity, when the "Sharpness" indicator in
the "IMAGE" menu is set to the center. Remember that 1 step of the indicator will increase or decrease the
sharpness intensity by 3. If the sharpness intensity of the center value is changed, each step of the indicator
will be changed accordingly. (For instance, if the center value is increased by 5 (sharper), the value of each
step of the indicator will also be increased by 5 (sharper).)
<Note> "Sharpening the copy image" and "Minimizing moiré" are mutually contradictory. When an
adjustment is performed to sharpen the copy image, moiré may occur.
Cautions after the completion of the adjustment
Nothing in particular.
Remarks
• Enter the value within the recommended value range mentioned in the procedures. Otherwise, it may cause a
loss in copier performance, including degradation in the image quality.
• Procedures (2) and (3) provide the same effect of the adjustment. However, procedure (3) allows more flexible
adjustment.
2. Copier-specific Adjustments
2.9